Tel: 0116 251 6487
Mon to Fri: 8.30am to 6pm

Crosswater Kai Digital Single Outlet Shower Mixer Valve With Processor

Crosswater Taps & Showers Logo
No Rating No Rating Write a Review
Rate This:
MFC Code : SOLOKLHP
Product Code : 48680
Delivery: £5.95
£382.85
RRP : £589.00

Crosswater Kai Digital Single Outlet Shower Mixer Valve With Processor.

Read More About the Product

qty :
Check Availability 5 Working Days Apprx
Pedestals and Stand
Optional Products

Basin can be used with Full pedestal or with chrome Basin Stand from Silverdale. Please note: Image shown is for illustration purpose only.


Digital Remote Control
Optional Digital Remote Control

Different types of remote control from Crosswater are available as an option. Please note: Image shown is for illustration purpose only.


  • Manufacturing Code: SOLOKLHP
  • Suitable for high water pressure systems (also available for low pressure systems - pumped optional)
  • Includes: 1 x High pressure single outlet digital valve and 1 x single dial controller module, 1 x 10m data cable, 1 x power supply, 1 x AC power cable, 1 x flow regulator pack and screw packs
  • Features and Specifications:
  • Finish: Chrome
  • The single outlet processor controls one showerhead, with a simple handle to adjust the temperature. Alternatively, it can be combined with our bath filler, allowing to use the same precise controls to fill bathtub
  • Dimensions of Controller Module: 73.8mm (7.38cm) Width x 73.8mm (7.38cm) Height
  • Dimensions of Processor: 229.4mm (22.94cm) Width x 138.97mm (13.897cm) Depth x 55mm (5.5cm) Height
  • Precise Temperature: A built-in thermistor checks every 10th second to ensure the water stays as close as possible to the set temperature
  • Cool-Touch Metal Controls: Controls are kept completely separate from the water in the valve, which means they always stay cool and safe to touch
  • Colour-Changing Controls: Switch on the shower the controls flash white as the water heats up to the set temperature. If you adjust the temperature, the LEDs flash red to let you know when the water is warming up and blue when it’s cooling down. As soon as the desired temperature is reached, the controls stop flashing and glow white
  • Installation: Push-fit isolation valves and a standard electrical plug fitting, as well as easy to set up cable connections, make the shower extremely simple to install
  • Cleaning Mode: Activate to clean the controls without accidentally turning on shower. Simply press and hold the power button to enable cleaning mode, which lasts for 1 minute
  • Consistent Temperature: The advanced thermostatic control automatically keeps the water at the set temperature - even if someone turns on a tap
  • Automatic Shut-Off - If water or power supply fails, the shower will turn of completely keeping you and your family safe
  • Approval: WRAS and TMV2
  • Technical Details:
  • Maximum Static Pressure: 700kPa (7 bar)
  • Minimum Maintained Pressure: 50kPa (0.5 bar)
  • Supply Pressure Differential: Nominally equal
  • Supplied factory-set at a maximum outlet temperature of 41°C. The maximum temperature can be reset to 46°C during set-up if preferred by the user
  • Hot Water Range: 55°C - 65°C
  • Cold Water Range: 1°C - 20°C
  • Temperature Control: Thermostatic control throughout the temperature range of 15°C to 46°C
  • Ambient Valve Temperature: 1°C - 40°C
  • Maximum Relative Humidity: 95% non-condensing
  • Flow Rate: Each outlet - 16 L/min maximum @ 1.0 bar (may vary significantly depending on inlet maintained pressure, pipework and spray mode of fitted accessories
  • Electric Supply: Supply voltage - 230V RMS 50 Hz +/- 10% and maximum load - 30W
  • Download installation and user guide PDF from technical tab
  • Watch or download videos showing the installation from technical tab
  • Warranty: 5 years against any manufacturing faults

Note: This product MUST be installed by a competent person in accordance with all current relevant statutes and regulations, including building regulations and the Water Supply (Water Fittings) Regulations 1999 (together the Water Supply Regulations). All showers requiring an electrical connection MUST be installed by a qualified person following the latest revision of BS7671 (Wiring Regulations) and certified to current building regulations. Before any electrical connections are made, the electrical supply must be turned off at the main switch.
Warning! If the maximum temperature is reset to 46°C this is entirely at the risk of the owner and the manufacturer can accept no liability for any resulting injury.
Cleaning: Only use a mild washing up detergent or soap solution, and then wipe dry using a soft cloth. Avoid using household cleaners containing abrasives and chemical substances.

Available Optional Products

  • For Low Pressure System
  • Remote Control.

You May Also Require

Questions & Answers


Write A Review

Kindly Submit Your Feedback For The Product
Please enter your name.
Please enter your city.
Please enter your review title.
Please enter your review comment.
How Many Stars Would You Give for the Following?
Quality:
Value For Money:
Style:

Ask A Technical Question

Kindly Submit Your Concern
Please enter your name
Please enter your valid email address
Please enter your question

Thank You For Your Rating

We will soon verify the details and add your rating appropriately.

Thank you for review feedback

We will soon verify the details and add your feedback appropriately.

Thank you for answer feedback

We will soon verify the details and add your feedback appropriately.