- Anglesey Angled Bath Filler - wall mounted [AN26]
- Consists of :
Angled Bath Filler (excluding tap heads, bases and unions) [T11]
Wall mounting unions 3/4" [T17-2]
Anglesey tap handles (pair) [T2] - Anglesey taps have a four spindle tap head with a ceramic indice in the centre
- Supplied with flow straighter - this is for use with low water pressure
- Flow straighteners make the flow of the water cleaner, so there is less splashing
- Supplied with aerator - this is for use with high water pressure
- Comes with traditional screw down valves
- Also available with optional quarter turn valves
- Aerators create the 'champagne' effect in the flow of the water
- Chrome plated bath filler tap
- Swivel spout to the left or right
- Wall Mounted traditional design
- Material: Bodies are of all brass construction
- Height : 200mm
- Width : 206mm
- Inlet centers :150mm
- Suitable for operation at (10 bar max.) and a minimum flow pressure of (0.1 bar)
- All tap indices are made from ceramic - absolutely no plastic
- The
aerators are designed to limit the flow of water to a fixed rate -
regardless of the incoming water pressure- so you have optimal
performance from your tap, without wasting any water
- All taps are manufactured from brass ingots and chrome plated to 0.3-0.4 micron
- Guarantee 10 years from Burlington
- For Fitting Instruction - Download PDF from Technical Tab
Note: The tap comes with a factory-fitted flow straightener for low pressure water systems. If the
water flow is high, replace the factory-fitted flow straightener with the high pressure aerator.
Both the aerator and a Neoperl key to replace the flow straightener are supplied with every tap
