- Birkenhead Regent basin mixer with high / low central Burlington ceramic indice with Click-Clack [BIR6]
- Consists of :
Basin Mixer (excluding tap heads & base) [T12]
Click-Clack basin waste [W11]
Birkenhead tap handles (pair) [T3]
Regent small single tap base [T4B]
- All Birkenhead taps have a six spindle tap head with a ceramic indice in the centre
- Tap indices are made from ceramic - absolutely no plastic
- Material : Bodies are of all brass construction
- Regent taps are 3cm higher than standard taps
- Traditional style basin mixer tap
- Chrome plated basin mixer tap
- Tap is manufactured from brass ingots and chrome plated to 0.3-0.4 micron
- Comes with traditional screw down valves
- Also available with optional quarter turn valves
- 10 years of Guarantee from Burlington
- Suitable for operation at (10 bar max.) and a minimum flow pressure of (0.1 bar)
- Height : 177mm
- Width : 200mm
- Centers of inlet to outlet is : 126mm
- Supplied with flow straighter - this is for use with low water pressure
- Supplied with aerator - this is for use with high water pressure
- The
aerators are designed to limit the flow of water to a fixed rate -
regardless of the incoming water pressure- so you have optimal
performance from your tap, without wasting any water
- Aerators create the 'champagne' effect in the flow of the water
- Flow straighteners make the flow of the water cleaner, so there is less splashing
- For Fitting Instruction - Download PDF from Technical Tab
Note : Basin mixers are available with a high central Burlington ceramic indice
or a low central Burlington ceramic indice. These two combinations are
supplied in the same box - so the consumer can make their choice in
their home at the point of installation.
Note: The tap comes with a factory-fitted flow straightener for low pressure water systems. If the
water flow is high, replace the factory-fitted flow straightener with the high pressure aerator.
Both the aerator and a Neoperl key to replace the flow straightener are supplied with every tap.
